Epic Displays provides custom-made banners for advertising in any space, indoor or outdoor, in a variety of materials and finishing options.
Finishing options are included in the square foot pricing below. Banners are finished per your specification with sewn pole pockets, grommets, contour cutting, and wind slits and hemmed edges where applicable at no extra charge.
The minimum size for a custom banner is 4 sq. ft. If the banner size required is wider than the bolt of material there will be one or more seams from the sewing or heat welding process. These seams can run horizontal or vertical at your choice.
Contact us today and we'll make it easy to get started on a great-looking banner.
A Custom Banner For Any Location
Epic Displays provides signage to large and small businesses all over the United States,
Canada, and Europe. This includes custom banners for:
- Outdoor Advertising
- Sporting Events
- Shopping Malls
- Retail Interiors
Deciding On the Material and Finishing
The type of material and sizing of the custom-made banner is most likely dictated by the space you are filling and the style you are looking to project.
You may require a banner for indoors or outdoors. Banners for outdoors are made specifically with weather conditions in mind. We can help recommend the best material and the appropriate print process for your banner.
How your banner will be installed is an important consideration. Our expert craftspeople set the bar in the finishing world, creating custom banners on a daily basis. Your creativity is never limited by their capabilities, with proper direction and understanding of your installation our team will finish your banner to your needs. Pole pockets, notches, grommets, pillow casing, Velcro® connections, extrusion systems, aluminum pole systems, and anything you can think of, we can
produce it. Banner finishing options are discussed in greater detail further below.
Choose From A Wide Range of Materials
The following table describes popular materials chosen for custom banners. Other options include PVC (translucent or opaque), adhesive vinyl, adhesive fabric, Melinex® film, foamcore, gatorboard, plexiglass (flame polished edging available), static cling film, etc.
|13 oz.||Anti-Curl Vinyl||Durable and lightweight, 100% opaque, fade-resistant UV printing||Indoor||$6.69 sq./ft.||Single-Sided|
|13 oz.||Anti-Curl Vinyl||Durable and lightweight, 100% opaque, fade-resistant UV printing||Indoor||$10.89 sq./ft.||Double-Sided|
|8 oz.||Oxford Fabric||Polyester fabric for long-lasting dye-sublimation printing||Indoor||$10.89 sq./ft.||Single-Sided|
|8 oz.||Oxford Fabric||Long-lasting dye-sub printing, opaque middle liner included||Indoor||$24.99 sq./ft.||Double-Sided|
|4 oz.||Satin||A silky fabric with a satin shine for dye-sub printing||Indoor||$10.89 sq./ft.||Single-Sided|
|13 oz.||Scrim Vinyl||Weather-resistant reinforced scrim for UV printing||Outdoor||$6.69 sq./ft.||Single-Sided|
|18 oz.||Scrim Vinyl||Weather-resistant reinforced scrim for UV printing||Outdoor||$6.69 sq./ft.||Single-Sided|
|18 oz.||Scrim Vinyl||Weather-resistant reinforced scrim for UV printing||Outdoor||$10.89 sq./ft.||Double-Sided|
|7 oz.||Mesh||Durable mesh vinyl that wind can pass through, UV printing||Outdoor||$6.69 sq./ft.||Single-Sided|
|6.5 oz.||Canvas||Canvas with water-resistant coating for UV printing||Outdoor||$10.89 sq./ft.||Single-Sided|
The following outlines and describes the various finishing options available for your custom banner.
Single-Sided Banner • A banner with an image printed on only one side of the material.
Double-Sided Banner • A double-sided banner can be produced by printing two individual banners and sewing them back-to-back. An opaque layer can be sewn between the two banners if necessary.
Grommet • A round metal eyelet which can be used for fastening or hanging. Choose between Grommet #2 (3/8″) or Grommet #3 (7/16″) at time of ordering.
Hem • An edge folded back and sewn. To prepare a banner for hemming, it needs to be printed larger than the desired finished size on all sides.
Pole Pocket • An edge folded over a specified distance, sewn, and used to hold a pole for hanging.
Wind Slit • A slit cut into the banner to give wind a way to blow through the banner, reducing stress on the banner.
Opaque Blocker • For materials that are not opaque, an opaque blocker is used between double-sided banners to avoid seeing the images through the banners. It also may be applied to a single-sided banner to block the light.